Differences

This shows you the differences between two versions of the page.

--- kerneldev [2013/08/22 13:36] – [3.0.x Kernel series] stuw
+++ kerneldev [2014/06/21 18:57] (current) – [Mainline Git Kernel] santox
@@ Line 197: / Line 197: @@
 <code>make tegra_defconfig</code>
+===== Mainline Git Kernel =====
+From 3.15, AC100 finally boots the official mainline kernel !
+To succesfully cross-compile it, i used linaro precompiled toolchain [[http://releases.linaro.org/14.05/components/toolchain/binaries/gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux.tar.xz]]:
+  wget http://releases.linaro.org/14.05/components/toolchain/binaries/gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux.tar.xz
+extract it somewhere, and export install path so the toolchain can be found:
+  tar xvf gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux.tar.xz
+  export PATH=$PATH:gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux/bin/
+Now you have to clone the kernel git repository:
+  git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
+  cd linux
+As already described above, configure && make && install and your kernel is ready!
+  make tegra_defconfig ARCH=arm
+  make zImage modules dtbs INSTALL_MOD_PATH=/tmp INSTALL_MOD_STRIP=1 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
+  make modules_install INSTALL_MOD_PATH=/tmp INSTALL_MOD_STRIP=1 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
+Copy everything you need in a folder (to copy on SD or USB key and put into AC100)
+  mkdir ~/linux-3.16-0
+  mv /tmp/lib/ ~/linux-3.16-0/
+  cp arch/arm/boot/zImage ~/linux-3.16-0/
+  cp arch/arm/boot/dts/tegra20-paz00.dtb ~/linux-3.16-0/
 ==== Kernel Debugging ====