Differences

This shows you the differences between two versions of the page.

--- kerneldev [2012/06/28 19:12] – marvin24
+++ kerneldev [2014/06/21 18:39] – Mainline Git Kernel santox
@@ Line 90: / Line 90: @@
 ===== 3.0.x Kernel series =====
 TODO
+=== From marvin24s git ===
+To build the kernel native on the ac100, do the following:
 <code>
 git clone -b chromeos-ac100-3.0 git://gitorious.org/~marvin24/ac100/marvin24s-kernel.git
@@ Line 96: / Line 97: @@
 make paz00_defconfig
 make zImage modules
+make modules_install
+</code>
+You will find the kernel in arch/arm/boot/zImage, which you can flash with abootimg (see above).
+Cross-Compiling:
+If you don't have the time to wait for a build on the AC100 (~ 30 minutes), you can try with a cross-compiler on your favorit desktop machine. How to setup such an environment is out of scope of this article, but google is your friend.
+The procedure is similar to the native one:
+<code>
+git clone -b chromeos-ac100-3.0 git://gitorious.org/~marvin24/ac100/marvin24s-kernel.git
+cd marvin24s-kernel
+make paz00_defconfig ARCH=arm
+make zImage modules INSTALL_MOD_PATH=/tmp INSTALL_MOD_STRIP=1 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
+make modules_install INSTALL_MOD_PATH=/tmp INSTALL_MOD_STRIP=1 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
+</code>
+The INSTALL_MOD_PATH and INSTALL_MOD_STRIP arguments are optional, but convenient. After this, you will find
+the stripped modules under /tmp/lib/modules/<kernel-version>.
+Similar procedures can be used for the 3.1 and for-next kernels.
+Some note on the needed kernel command lines:
+The 3.0 series uses a reserved video memory which is created by adding "mem=448M@0" to the kernel command line.
+Later kernels can reserve this memory by themself, thus adding "mem=512M@0" is required here.
+The for-next series is very special (you may have guessed that already). First, everything is setup by device-tree info (if you don't know what a device-tree is, yes, google is your friend again). This means that beside the kernel and the modules, you also have to compile the device-tree, which is done by the "dtbs" make target. After that, the compiled device-tree (in arch/arm/boot/tegra20-paz00.dtb) must be concatenated to the kernel image. So something like
+<code>
+cat arch/arm/boot/tegra20-paz00.dtb >> arch/arm/boot/zImage
+</code>
+should be sufficient. Make sure you used paz00_defconfig, because this kernel seems to ignore the parameters submitted by the bootloader.
+=== Stock Ubuntu 12.04 Kernel ===
+Step by step: Recompiling the Ubuntu stock kernel natively (for example to patch it) coming from a stock Ubuntu 12.04 install.
+As of writing the kernel-version is **3.0.27** and will have to be replaced when another kernel comes out/is used. The created files will be copied to a safe place (/home/turbo/Downloads/ in my case)
+Become root for all steps
+<code>sudo su</code>
+Install dependencies for the kernel and build it:
+<code>
+apt-get build-dep linux-ac100
+apt-get install build-essential lzop
+cd /usr/src/
+apt-get source linux-ac100
+cd linux-ac100-3.0.27/
+</code>
+Now if you want the original Ubuntu config do
+<code>cp /boot/config-$(uname -r) .config</code>
+If you want the standrad ac100 config instead do:
+<code>make paz00_defconfig</code>
+Apply patches if wanted. In this example I use gordans overclocking patches from [[http://www.altechnative.net/2011/12/31/overclocking-the-toshiba-ac100/|his site]].
+<code>patch -p1 < tegra_common.patch
+patch -p1 < tegra_1200.patch</code>
+(Note that one patch didn't apply cleanly, but the errors were pretty obvious and easy to fix manually.)
+<code>
+make -j3 INSTALL_MOD_STRIP=1 zImage modules
+make -j3 modules_install
+cp arm/boot/zImage /home/turbo/Downloads/zImage1200-3.0.27
+cp .config /boot/config-3.0.27
+</code>
+Get the bootimg.cfg
+<code>cd /boot/bootimg.cfg /home/turbo/Downloads/</code>
+Adjust the bootimg.cfg to your needs. Most importantly giving it a cool greeting text of course!
+Create the initrd
+<code>
+cp .config /boot/config-3.0.27
+update-initramfs -k 3.0.27 -c
+cp /boot/initrd.img-3.0.27 /home/turbo/Downloads/initrd1200-3.0.27.img
+</code>
+Create the final image
+<code>cd /home/turbo/Downloads/
+abootimg --create part6_1200-3.0.27.img -f bootimg.cfg -k zImage1200-3.0.27 -r initrd1200-3.0.27.img</code>
+In my case (10K, Android 2.2) the boot partition is partition 6 as seen by nvflash and /dev/mmcblk0p4 as seen from Ubuntu. Make sure you flash to the right partition, this means: `cat /proc/partitions` has to show the partition as 8.0 MiB and `sudo abootimg -i /dev/mmcblk0p4` has to show "Android boot Image" in the first line.
+Double-check and create a backup of the boot partition:
+<code>dd if=/dev/mmcblk0p4 of=/home/turbo/Downloads/part6-$(uname -r).img</code>
+Size of the original is 8388608 aka 8.0M. This backup wont help you if it's //on// your ac100, so:
+Be sure to copy this image somewhere else.
+Be sure to copy this image somewhere else. Really.
+Flash the image
+<code>dd if=/home/turbo/Downloads/part6_1200-3.0.27.img of=/dev/mmcblk0p4</code>
+Reboot.
+===== 3.10.x Kernel series =====
+.10 build process is close to 3.0 for-next.
+Device-tree is mandatory, you need to build it and concatenate with a kernel:
+<code>
+make dtbs
+cat arch/arm/boot/tegra20-paz00.dtb >> arch/arm/boot/zImage
 </code>
+But 3.10 don't use paz00_defconfig anymore. Instead is uses tegra_defconfig (main idea of device-tree is to have all-in-one kernel and choose drivers on boot time using device-tree):
+<code>make tegra_defconfig</code>
+===== Mainline Git Kernel =====
+From 3.15, AC100 finally boots the official mainline kernel !
 ==== Kernel Debugging ====