DokuWiki

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

DRAFT

====== Fedora Installation Procedure ======

as **root** on your work pc|laptop:

mkdir /tmp/fc14arm
  cd $_
  mkdir root
  # make filesystem
  mkfs.ext4 -b 4096 -E stripe-width=16 -O ^has_journal /dev/sdXN
  mount -t ext4 /dev/sdxN root
  wget http://fedora.roving-it.com/rootfs-f14-alpha1.tar.bz2
  tar xvf rootfs-f14-alpha1.tar.bz2 --numeric-owner -C root
  wget http://repo.kastnerove.cz/modules-2.6.38.3-ac100-marvin24+.tar.bz2
  tar xvf modules-2.6.38.3-ac100-marvin24+.tar.bz2 --numeric-owner -C root
  wget http://repo.kastnerove.cz/firmware-2.6.38.3-ac100-marvin24+.tar.bz2
  tar xvf firmware.tar.bz2 --numeric-owner -C root
  #modify /etc/fstab
  vim root/etc/fstab
  umount root
  
  # now to get image of boot partition
  wget http://repo.kastnerove.cz/aboot-2.6.38.3-ac100-marvin24+.img
  
  # if neccessary modify it using abootimg (image is used for sdX1 = root and sdX2 = swap) and then..
  nvflash -r --download 6 aboot-2.6.38.3-ac100-marvin24+.img

remove sdcard from work pc|laptop and enter to your ac100

boot ac100

login as **root** (password is '//fedroaarm//')

append additional repos to koji-latest repo (koji repo has only 2 groups for building)

cat << EOF >> /etc/yum.repos.d/fedora-koji-f14.repo
  [branched-20110824]
  name=branched-20110824
  baseurl=http://arm.koji.fedoraproject.org/mash/branched-20110824/14/arm/os/
  enabled=1
  gpgcheck=0
  
  [tegra-rpms]
  name=tegra-rpms
  baseurl=http://repo.kastnerove.cz/rpm/$basearch/f$releasever/RPMS/
  enabled=1
  gpgcheck=0
  metadata_expire=1s
  EOF

and install drivers and some windows

yum groupinstall XFCE X\ Window\ System --skip-broken && yum install xorg-x11-drv-tegra
  # switch to runlevel 5 
  init 3 && init 5

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International