Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.
Currently locked by: 10.89.1.3,13.58.67.129
Lock expires at: 2025/04/19 04:09 (3 min)
This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====ArchLinux arm installation on toshiba ac100====

I used [[http://archlinuxarm.org/platforms/armv7/trimslice#qt-platform_tabs-ui-tabs2|ArchLinuxARM TrimSlice]] base filesystem, \\
[[http://gitorious.org/~marvin24/ac100/marvin24s-kernel/trees/chromeos-ac100-3.0-exp|chromeos-ac100-3.0-exp]] kernel branch by [[http://gitorious.org/~marvin24|marvin24]] \\
and [[http://gitorious.org/ac100/abootimg/trees/master|abootimg]] by [[https://gitorious.org/~phhusson|phhusson]].

On my system there were ubuntu on emmc; so installed arch on SD.

You can also use [[sosboot|SOSBoot Image]] to install archlinux on clean ac100. \\
With sosboot, you should put three files linked below to usb stick or sdcard cause SOSBoot doesn't provide any wireless connectivity.

===Getting files===
  cd ~/Downloads
  wget http://archlinuxarm.org/os/ArchLinuxARM-trimslice-latest.tar.gz \
      http://flie.no-ip.org:7080/archlinux/armv7h/{abootimg-git-20121116-1,linux-ac100-chromeos-exp-3.0.27-2}-armv7h.pkg.tar.xz
  
===Untarring fs on SD===
  #mmcblk1 is the SD. Use mmcblk0p7 to install on MMC
  #use a ext3 or ext4 formatted SD 
  sudo mount /dev/mmcblk1p1 /mnt
  cd /mnt
  sudo tar xvf ~/Downloads/ArchLinuxARM-trimslice-latest.tar.gz
  sudo cp ~/Downloads/{linux-ac100-chromeos-exp-3.0.27-2,abootimg-git-20121116-1}-armv7h.pkg.tar.xz root

===Installing kernel into the trimslice fs===
  sudo -i
  cd /mnt
  mount -t proc none proc
  mount -o bind /dev dev
  mount -o bind /sys sys
  
  chroot ./ /bin/bash
  pacman -R linux-trimslice linux-headers-trimslice nvidia-trimslice # Remove unneeded trimslice stuff
  rm /etc/netcfg.d/ethernet-eth0 # no eth in ac100
  pacman -U /root/linux-ac100-chromeos-exp-3.0.27-2.tar.xz /root/abootimg-git-20121116-1-armv7h.pkg.tar.xz

Now you should find out which partition is you bootpart
run
  for f in /dev/mmcblk0*; do abootimg -i $f 2>&1 | fgrep -q "cmdline = " && echo $f; done
For me output was like **/dev/mmcblk0p2** \\
So, lets write kernel and initramfs here:
  dd if=/boot/bootimg-linux-ac100-chromeos-exp.img of=/dev/mmcblk0p2
  exit
  cd /
  umount -l /mnt/{proc,dev,sys}
  umount /mnt

===Rebooting the ac100===
  reboot #everything's gonna be alright :)
access the system as usr=root, pwd=root.
====Arch base configuration====
be careful: you have a base survive vi installation.. don't use arrows :)
or use nano instead.

See [[https://wiki.archlinux.org/index.php/Beginners%27_Guide#Chroot_and_configure_the_base_system|Beginners' Guide. Chroot and configure the base system]]

====Connect to the internet====

=== WIFI ===
tweak /etc/wpa_supplicant.conf to connect to your wifi: 
<file - wpa_supplicant.conf>
#open network
network={
      ssid="dlink"
      key_mgmt=NONE
}
#WEP protected network
network={
      ssid="VodafoneMobileHotspot_ 805F"
      key_mgmt=NONE
      wep_key0="MUDGCFJ7GSJVF"
}
#WPA protected network
network={
      ssid="AP_NAME1"
      psk="passwd!1"
      priority=5
}
</file>
bring wifi on:

  modprobe rt2800usb
  rfkill unblock wifi
  wpa_supplicant -B -Dwext -iwlan0 -c/etc/wpa_supplicant.conf
  dhcpcd wlan0
  
=== GSM Modem ===
pppd and chat stuff for 3G modem connection
  nano /etc/ppp/peers/mts
Just an example for my GSM operator.
Put this to file:
<file - mts>
/dev/ttyACM0
noipdefault
defaultroute
persist
noauth
nodetach
usepeerdns
user "mts" # may need to be changed for you operator settings
password "mts" # this one too
connect "/usr/sbin/chat -vf /etc/ppp/chatscripts/mts.chat"
</file>

contents of /etc/ppp/chatscripts/mts.chat (APN goes here):

<file - mts.chat>
TIMEOUT 3
ABORT BUSY
ABORT 'NO CARRIER'
ABORT VOICE
ABORT 'NO DIALTONE'
ABORT 'NO DIAL TONE'
ABORT 'NO ANSWER'
ABORT DELAYED
"" ATZ
OK ATX3Q0V1E1S0=0&C1&D2
OK-AT-OK AT+CFUN=1
OK-AT-OK AT+CGDCONT=1,"IP","internet.mts.ru"
OK ATDT*99#
CONNECT ""
</file>

Now you can trying to get connection
  pppd call mts

====Update the system====

  pacman -Syu

====Install base packages====

  pacman -S xorg-server xterm xf86-video-fbdev lxterminal lxrandr ttf-dejavu
  pacman -S xf86-input-synaptics #needed for a usable touchpad
  pacman -S openbox tint2 geany modemmanager vim sudo evince gpicview pcmanfm polkit \
    lxtask htop laptop-mode-tools laptop-detect powertop lightdm lightdm-gtk-greeter
  # You can use wifi-menu or wicd instead of network-manager
  pacman -S networkmanager network-manager-applet gnome-keyring

====Create a user====	

  username=myusername # change this
  useradd -m -g users $username
  usermod -aG bin,daemon,adm,tty,disk,kmem,wheel,ftp,rfkill,http,network,video,audio,storage,scanner,power,dbus $username
  passwd $username
  
====Run X====
  systemctl start lightdm
If all goes well, you may add lightdm to autostart
  systemctl enable lightdm
====Useful things====

ZramSwap and events handling
  pacman -S yaourt
  yaourt -S zramswap input-event-daemon

See also:
[[headphones_insertion_handling|Autoswitch speakers and backlight]]

[[https://wiki.archlinux.org/index.php/Touchpad_Synaptics|Touchpad Synaptics]]

====OpenGLES2 and hardware video decoding====

<HTML>
<span style="color:red;font-size:120%;">
Attention: This section targeted at developers, not at users. <br/>
If you have problems with this stuff, just remove nvidia-tegra package.<br/>
<br/>
</span>
</HTML>

As for now, you should downgrade you xorg-server package cause of use-pixman-glyph-cache.patch [[https://bugs.archlinux.org/task/32612|bug 32612]] \\
in newer (1.13.0-4 and 1.13.0.901-1) package versions to avoid font rendering problems.\\
Latest known working version 1.13.0-3 available in **fly-ac100** repo (see below)  

You may add repo **fly-ac100** into you **/etc/pacman.conf** to get some prebuilded kernels, drivers and utils for ac100. 
\\ Source pkgbuilds: [[https://github.com/fly-away/PKGBUILDs]] and
 [[https://aur.archlinux.org/|AUR]]
  [fly-ac100]
  Server = http://flie.no-ip.org:7080/archlinux/armv7h/
Install sortware from new repo:
  pacman -Sy fly-ac100/xorg-server nvidia-tegra totem-gst libegl libgles libva mesa-demos-git gnome-media 

Add to your **/etc/pacman.conf**:\\
  IgnorePkg   = xorg-server
to mask xorg-server package for updates.\\

Also see [[hw_accelerated_video_playback#gstreamer_tuninig|Hardware accelerated video#gstreamer_tuninig]] for further instrustions
====Want to go further with archlinux====
[[https://wiki.archlinux.org/index.php/Main_Page|archlinux]]

[[http://archlinuxarm.org/|ArchLinuxArm]]

====Problems and todo====
  * Artefacts and fonts problems in X
  * Some programs chashes from time to time