Differences

This shows you the differences between two versions of the page.

--- fedora [2011/08/09 22:26] – e-ndy
+++ fedora [2012/02/17 23:58] (current) – [Fedora Installation Procedure] armelf
@@ Line 1: / Line 1: @@
-as **root**:
+DRAFT
+====== Fedora Installation Procedure ======
+as **root** on your work pc|laptop:
   mkdir /tmp/fc14arm
   cd $_
   mkdir root
-  mount -t xxxfs /dev/sdxN root
+  # make filesystem
+  mkfs.ext4 -b 4096 -E stripe-width=16 -O ^has_journal /dev/sdXN
+  mount -t ext4 /dev/sdxN root
   wget http://fedora.roving-it.com/rootfs-f14-alpha1.tar.bz2
   tar xvf rootfs-f14-alpha1.tar.bz2 --numeric-owner -C root
@@ Line 11: / Line 18: @@
   wget http://repo.kastnerove.cz/firmware-2.6.38.3-ac100-marvin24+.tar.bz2
   tar xvf firmware.tar.bz2 --numeric-owner -C root
+  #modify /etc/fstab
+  vim root/etc/fstab
+  umount root
   # now to get image of boot partition
   wget http://repo.kastnerove.cz/aboot-2.6.38.3-ac100-marvin24+.img
-  # if neccessary modify it using abootimg and then..
+  # if necessary modify it using abootimg (image is used for sdX1 = root and sdX2 = swap) and then..
   nvflash -r --download 6 aboot-2.6.38.3-ac100-marvin24+.img
-  umount root
-remove sdcard from working pc and enter
+remove sdcard from work pc|laptop and enter to your ac100
 boot ac100
-login as root (password is 'fedroaarm')
+login as **root** (password is '//fedroaarm//')
-add latest repo
+append additional repos to koji-latest repo (koji repo has only 2 groups for building)
   cat << EOF >> /etc/yum.repos.d/fedora-koji-f14.repo
-  [branched-20110805]
+  [branched-20110831]
-  name=branched-20110805
+  name=branched-20110831
-  baseurl=http://arm.koji.fedoraproject.org/mash/branched-20110805/14/arm/os/
+  baseurl=http://arm.koji.fedoraproject.org/mash/branched-20110831/14/arm/os/
   enabled=1
   gpgcheck=0
   [tegra-rpms]
   name=tegra-rpms
-  baseurl=http://repo.kastnerove.cz/rpm/$basearch/f$releasever/RPMS/
+  baseurl=http://repo.kastnerove.cz/rpm/arm/f$releasever/RPMS/
   enabled=1
   gpgcheck=0
@@ Line 43: / Line 53: @@
 and install drivers and some windows
-  yum install xorg-x11-drv-tegra && yum groupinstall XFCE X\ Window\ System --skip-broken
+  yum groupinstall XFCE X\ Window\ System --skip-broken && yum install xorg-x11-drv-tegra
+  # switch to runlevel 5
+  init 3 && init 5
+__Tequila note:
+__
+You may want to upgrade linux-firmware to F15 one as it contains updated wifi rt2870.bin firmware for AC-100, just issue in a root shell on your AC-100:
+  rpm -Uvh http://mirrors.kernel.org/fedora/updates/15/i386/linux-firmware-20110601-1.fc15.noarch.rpm
+===== External reference =====
+[[http://fedoraproject.org/wiki/Architectures/Fedora_ARM_Kernels|Fedora ARM Kernels]]